Showing results for 
Search instead for 
Did you mean: 

ZD3000 doesn't generate IP for web GUI

New Contributor
Several ZD3000 added to inventory recently boot properly and get to the green light stage, but don't generate IPs to allow me to access web GUI for setup.

I've performed a factory reset - no change.

Any ideas how to fix this?

Esteemed Contributor II
If you are pressing the indented F/D button for 8+ seconds before release, the ZD's default IP address is with uid/pw of admin/admin.

You need to pre-set your PC to an IP address in the 192.168.0.x range and connect Ethernet to either front port.

By default, the internal DHCP server will not be enabled.