ZD1100 jumps to web-address

[Anonymous]

I rebooted a used ZD1100, updated the FW locally (Refresh6) via 192.168.0.2. Worked fine, no problems. But after connecting the unit in the network it first jumped to https://192.168.0.2/tohttps.jsp  and directly jumped to https://hol-wlan01.???.com (???=clientsname of company). I cannot access the ZD1100 anymore, via its IP, allthough the ping does work. Does anyone have a solution for this?

[Anonymous]

Connect zd through ur laptop directly assign same range ip then access the zd

[Anonymous]

Off course tried that, as mentioned the initial reboot and upgrade of FW went smooth. Only after connecting it to network/internet, this issue occurred

[Anonymous]

What issue exactly can u explain , is ap model support that firmware . Which u upgraded , which firmware u r currently using with build no

[michael_brado]

I've never heard of this behavior either.  I recommend Factory Default your ZD, not just a Reboot, to clear whatever might have been on it.
If that's not it...

If you see this problem after a FD, I'd question the source of your purchase, about where did the ZD come from originally?  Could it have been an OEM from a local ISP?  In which case, a custom boarddata config cannot be changed, and it would need to be fixed/replaced/managed by the ISP who had the legal right to sell it with a custom config.