cancel
Showing results for 
Search instead for 
Did you mean: 

Upgrading firmware using command line

thomas_untoja
New Contributor II
Is it possible to use command line to upgrade a firmware on a standalone 7363 AP using a local FTP server?
If so, how should it be done?
The ftp has been setup with a specific user/password, However, the fw command does not seem to start the upgrade.
5 REPLIES 5

michael_brado
Esteemed Contributor II
The firmware control file is a text file which you can edit. The two key pieces of information are the firmware filename, and matching byte count. And you need
to reboot the AP after upgrading, for it to load the new image.