cancel
Showing results for 
Search instead for 
Did you mean: 

POE Injector with 7731 not powering the device

donald_curry_58
New Contributor III
I am installing a 7731, when I connect the 7731 device to the AP/BRIDGE port of the included POE injector, the red light on the POE injector turns off, and the 7731 does not get power. Any ideas?
2 REPLIES 2

matthew_mills_5
New Contributor III
Have you tried the PoE that comes with the other 7731?

it_registration
Contributor
I had similar issues. I ended up resolving my issue using PowerDsine 3501G midspans.

Now since I'm in Minnesota, I bought the PowerDsine 9000 series midspan so as to provide 802.3at power to enable the internal heaters if needed during the winter months.
Labels