ZoneDirector 1200 running v10.5.1 build 265
New R650 access point
power up the r650, no web access. never appears for adoption in zonedirector. SSH into the AP and manually enable https, set the director IP, still nothing.
SSH info:
rkscli: get version
Ruckus R560 Multimedia Hotzone Wireless AP
Version: 118.1.0.0.1098
OK
rkscli: get director ip
------ ZoneDirector Info ------
Primary Controller : 10.45.16.6
Secondary Controller : n/a
DHCP Opt43 Code : 3
AP is in Stand-alone mode.
OK
rkscli: ping 10.45.16.6
PING 10.45.16.6 (10.45.16.6): 56 data bytes
64 bytes from 10.45.16.6: seq=0 ttl=64 time=0.559 ms
64 bytes from 10.45.16.6: seq=1 ttl=64 time=0.305 ms
64 bytes from 10.45.16.6: seq=2 ttl=64 time=0.378 ms
64 bytes from 10.45.16.6: seq=3 ttl=64 time=0.371 ms
64 bytes from 10.45.16.6: seq=4 ttl=64 time=0.336 ms
--- 10.45.16.6 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 0.305/0.389/0.559 ms
OK
EVERY time I reboot the AP, https access is disabled again and I have to SSH in again to re-enable it, so it kind of seems like it is getting SOME kind of info from the ZoneDirector, but the AP never appears in the ZonDirector for adoption at all.
I don't see any info in the director logs related to the new AP.
I'm really hoping I'm missing something obvious. We have roughly 100 Ruckus APs across various client sites, but this is the first (of many) r650 we have added. Many of these will be replacing old r500s, and everything will later be moved to a redundant set of virtual SmartZone controllers. But right now... HELP?
