Need to upgrade ZD3000 to latest stable version from 9.13 build can any one help with the upgrade path

[pavan_kumar_tol]

Need to upgrade ZD3000 to latest stable version from 9.13 build

[pavan_kumar_tol]

Hi Sanjay ,

We checked APs are not upgraded and once we reset and the APs and gave set controller ip ,but still they are not picking up controller and APS and Controller are in the same segment.

now do we integrate the APs with the controller.

[sanjay_kumar]

Hi Pavan,

Looks like, the AP is unable to upgrade due to older version.
Try the below step on one AP and see if that works.

1. Reset the AP.
2. Upgrade the AP to the 114 version from the below link.
3. Set the controller IP and see if it works.

https://support.ruckuswireless.com/software_terms_and_conditions/2373-zoneflex-solo-access-point-114...

[pavan_kumar_tol]

Hi Sanjay ,

Is that the same with H500 AP also ,what would the firmware for H500 APs

Since another 2 APs are H500.

[sanjay_kumar]

Hi Pavan,

H500 is not supported in the 10.2.1 release, it has been discontinued.

[pavan_kumar_tol]

Hi thanks

So any other solution 

regards
Pavan