MM2211 Metro Broadband Gateway has login problems

[Anonymous]

From Henk Kolk the Netherlands (henk.k@me.com)
It concerns a 2211 Metro Broadband Gateway. It is configured as a repeater and locked in frequency to an AP at ch 1. The unit does not work correctly. But It does not respond to the default IP address (192.168.30.1 or 192.168.1.1) The login screen doesnot appear . A reset to the factory settings does not help. A second unit gave the same result. Is there a default IP address I can use to connect and change the configuration?

[Anonymous]

Hi, I can't access and login to mm2211, i was able to login in once using admin and password as credentials but after reset it is not accepting the same password

[michael_brado]

super sp-admin

[Anonymous]

Sir, this credentials too are not accepting

[Anonymous]

Perfect! the default login and password (admin/password) did not work for me either after resetting the device. After finding this post i am now able to login again.

user: super
pwd: sp-admin

THanks!

[michael_brado]

No charge...  =:^)