How to configure RADIUS NAS ID in Zone Director

[chee_how_lim]

I want to specify the NAS ID for RADIUS authentication in Zone Director. How can I do it?

[nuno_pimentel]

Hello Chee, you have to do by CLI mode. And that configuration is done in the config of the WLAN you will use the radius authentication like this:

ruckus(config-wlan)#

nasid-type wlan-bssid                      Sets NAS-ID to 'WLAN BSSID'. (default)

nasid-type mac-addr                        Sets NAS-ID to 'Controller MAC address'.

nasid-type user-define {WORD}   Sets NAS-ID to user-defined string.