cancel
Showing results for 
Search instead for 
Did you mean: 

Fail to initialize the configuration of all AP because number of AP in configuration exceeds system limit

jesus_olivas
New Contributor II
hello, I got this in the event log of the ZD: "Fail to initialize the configuration of all AP because number of AP in configuration exceeds system limit". But the ZD is licensed for 6 APs and has only 3 APs connected. Have you ever meet this before?
4 REPLIES 4

keith_redfield
Valued Contributor II
What version of ZoneFlex are you running and what is the uptime of the ZD?

If the ZoneFlex firmware is ~8.x it's possibly a known issue with the ethernet drivers. Secondary however to something going horribly wrong on the ethernet side (such as DOS attack, broadcast storm, etc)

If you are under support, I recommend you grab the ZD Debug file, and open a support case.

OK many thanks Keith. I will double check the ZD firmware version

monnat_systems
Valued Contributor II
Hello Jesus,

Not sure why this is happening however i just ran this error message in syslog message guide on PDF page 12 - https://support.ruckuswireless.com/do...

it says that its a critical event and you shall - Delete APs from the list to allow
new APs to join.

Do you have another ZD or AP's in the network?

Hello,
Many thanks for your answer. No, there are no other ZDs nor APs on the network. I will have a look at the AP list
Labels