Fail to initialize the configuration of all AP because number of AP in configuration exceeds system limit

[jesus_olivas]

hello, I got this in the event log of the ZD: "Fail to initialize the configuration of all AP because number of AP in configuration exceeds system limit". But the ZD is licensed for 6 APs and has only 3 APs connected. Have you ever meet this before?

[keith_redfield]

What version of ZoneFlex are you running and what is the uptime of the ZD?

If the ZoneFlex firmware is ~8.x it's possibly a known issue with the ethernet drivers. Secondary however to something going horribly wrong on the ethernet side (such as DOS attack, broadcast storm, etc)

If you are under support, I recommend you grab the ZD Debug file, and open a support case.

[jesus_olivas]

OK many thanks Keith. I will double check the ZD firmware version

[monnat_systems]

Hello Jesus,

Not sure why this is happening however i just ran this error message in syslog message guide on PDF page 12 - https://support.ruckuswireless.com/do...

it says that its a critical event and you shall - Delete APs from the list to allow
new APs to join.

Do you have another ZD or AP's in the network?

[jesus_olivas]

Hello,
Many thanks for your answer. No, there are no other ZDs nor APs on the network. I will have a look at the AP list