DHCP issue in ruckus AP
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-06-2015 11:03 PM
Hi all
i have created two ssid say abc1 with vlan 20 and abc2 with vlan30
when user connects to abc1 , they are connected and recieves ip of vlan 20
But when the Users connect to abc2 , they are not recieving the ip .
The dhcp server is located on the physical server .
Please suggest where is the issue
i have created two ssid say abc1 with vlan 20 and abc2 with vlan30
when user connects to abc1 , they are connected and recieves ip of vlan 20
But when the Users connect to abc2 , they are not recieving the ip .
The dhcp server is located on the physical server .
Please suggest where is the issue
6 REPLIES 6
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-07-2015 05:07 AM
Hi Abhinav,
I would like you to refer to below old post and this shall provide you some guidance
https://forums.ruckuswireless.com/ruc...
If this does not help please get back here so that I can give a fresh shot.
Hope this helps.
I would like you to refer to below old post and this shall provide you some guidance
https://forums.ruckuswireless.com/ruc...
If this does not help please get back here so that I can give a fresh shot.
Hope this helps.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-09-2015 12:26 AM
HI thanks
No, still i am in issue . please suggest
As two ssid are connected and the Users are recieving the IP and bu with the Third SSID Unable to get the Ip
No, still i am in issue . please suggest
As two ssid are connected and the Users are recieving the IP and bu with the Third SSID Unable to get the Ip
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-09-2015 12:29 AM
Hi Abhinav,
What if you hardwire the client in to the same VLAN ? Do you get ip address?
Thanks
What if you hardwire the client in to the same VLAN ? Do you get ip address?
Thanks
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-09-2015 01:45 AM
yes i get the Ip

