cancel
Showing results for 
Search instead for 
Did you mean: 

Client unable to get IP from ZoneController

john_ho_7036121
New Contributor II
Hi

Some of my laptop user could not get connected to the AP after firmware upgraded on the Zone Director.

Previously, the ZD is running on version 9.5.0.0.50 and now it was upgraded to 9.9.0.0.205.

Image_ images_messages_5f91c3e8135b77e2478da679_bf68d837182e3b5a5e75bb1a6d77fb87_ScreenHunter_09Jan.2709.07_inl-10c86920-22f8-44c4-ae51-1bf6a80fb3f5-1418545496.jpg1422321341

Can anyone help on this.

Regards
John
6 REPLIES 6

munish_munish
Contributor
Hi John,

Could you check and clear the leases on the DHCP server and see if the client gets IP addresses .

Regards,
Munish

john_ho_7036121
New Contributor II
Hi Munish

I had tried to delete the Client but it keep allocate back the same IP (169.xxx.xxx.xxx)

regards
John

munish_munish
Contributor
Hi John,

where is the DHCP server ? Internal or External . I had worked on exact same issue last week and found the issue with DHCP server . Where in after clearing the leases on dhcp server ,clients were able to get the IP addresses. how many clients connect to the wireless in peak hours and what is the lease time configured in the dhcp server ?

Regards,
Munish

john_ho_7036121
New Contributor II
Hi Munish

The DHCP Server is on the ZoneDirector itself.

The DHCP lease time is 6 hours by default. That is the lowest in the setting.

Where can I go to clear off the leases on the DHCP Server.

Regards
John