Change IP of AP's Question

[scott_baker_612]

7731 Outdoor AP's. If i need to change the IP address of the AP's, will it effect the ZoneDirector 1100? Do i need to change the ZoneDirector also? As i will be changing the AP's to a different Subnet.

Thanks

[keith_redfield]

BTW – to get an upgrade for your ZD, just register that new 7321 on our support website at https://support.ruckuswireless.com/re... – If it's in the software warranty window (offically 90-days from when we ship, but we fudge that a bit) that will trigger your account for a temporary upgrade to Premium status and will allow you to download the ZD upgrade.

[scott_baker_612]

Thanks:)

Upgraded firmware from ZD1100 9.4.0.0.build 110 to ZD1100 9.4.2.0.build 29

[chaand_farish]

You can change your AP ( access point ) ip address by using the following steps :

Step 1
Login the Web-based Interface of your wireless access point or extender. If you cannot login the Web-based Interface of the AP, Please click here.

Step 2
Click Network on the left hand, and then change the IP address to the one which is not used but suitable for your network, then

click on Save to save your settings.

Note:
1. The settings will take effect once the device is rebooted.
2. If you have a broadband router which provide you Internet connection, please re-configure the IP settings of your computer to Obtain an IP address automatically to suitable for the router in order to connect to Internet after the settings.

after changing your ip address, you can use http://www.ip-details.com/ to check whether your ip gets changed or not .