cancel
Showing results for 
Search instead for 
Did you mean: 

Can I configure SZ100 ports on different network rather on different subnets

abdullah_zia_76
New Contributor III
Can I configure SZ100 ports as P1 and P2 on 192.168.11.0 for Management and AP control and P3 and P4 on another network like 172.16.0.0 for AP Data
1 REPLY 1

sid_sok
Contributor II
Yes, you will need to set it up as a 2 Port config.  Port1 (Eth1 OR 2) for Management/cluster/control and Port2 (Eth 3 OR 4) for (client) Data (termination)

Sid
Labels