Anyone using Cacti?
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-20-2013 07:17 AM
I am running Cacti for monitoring our network, and would like to monitor the Zone Director as well. What I'm running into is that there are no Cacti templates out there and I'm not comfortable building my own. Has anybody built a Cacti template that monitors the ZD or APs?
64 REPLIES 64
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-30-2014 01:08 AM
Thanks J,
I gave it a try but all I am getting is "0" all the time even though the ZD reports 5 clients per device, might need to log a ticket with support.
I gave it a try but all I am getting is "0" all the time even though the ZD reports 5 clients per device, might need to log a ticket with support.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-30-2014 03:19 PM
Checking some old SNMP notes...
You should try this:
> user@linux:ruckus# snmpwalk -On -c $COMMUNITYSTRING -v2c -Pe -m "" $CONTROLLER-IP .1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.15
> user@linux:ruckus# snmpwalk -On -c $COMMUNITYSTRING -v2c -Pe -m "" $CONTROLLER-IP .1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.16
> user@linux:ruckus# snmpwalk -On -c $COMMUNITYSTRING -v2c -Pe -m "" $CONTROLLER-IP .1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.2
Did that give you what you want?
My old SNMP notes can be found here:
https://forums.ruckuswireless.com/ruc...
You should try this:
> user@linux:ruckus# snmpwalk -On -c $COMMUNITYSTRING -v2c -Pe -m "" $CONTROLLER-IP .1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.15
> user@linux:ruckus# snmpwalk -On -c $COMMUNITYSTRING -v2c -Pe -m "" $CONTROLLER-IP .1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.16
> user@linux:ruckus# snmpwalk -On -c $COMMUNITYSTRING -v2c -Pe -m "" $CONTROLLER-IP .1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.2
Did that give you what you want?
My old SNMP notes can be found here:
https://forums.ruckuswireless.com/ruc...
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-08-2014 04:54 AM
I don't have the original files, so I exported the templates I've been using.
https://dl.dropboxusercontent.com/u/7...
https://dl.dropboxusercontent.com/u/7...
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-08-2014 06:03 AM
John,
I don't see your note about 9.8.1.0 here, but saw it in the email notification. I can confirm that I upgraded an existing system to that version and the ZD related SNMP continued to work just fine. HOWEVER, I noticed I'm not able to get info from the APs any longer. I have no idea if that was related to the upgrade or not. Haven't had time to investigate.
I don't see your note about 9.8.1.0 here, but saw it in the email notification. I can confirm that I upgraded an existing system to that version and the ZD related SNMP continued to work just fine. HOWEVER, I noticed I'm not able to get info from the APs any longer. I have no idea if that was related to the upgrade or not. Haven't had time to investigate.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-08-2014 06:16 AM
Sorry Travis. I edited my comment after posting it. I restarted Cacti, and my graphs started working again. All that I'm collecting from the APs is uptime.

