cancel
Showing results for 
Search instead for 
Did you mean: 

Access zone director from out of lan ?

ali_sureyya_uz
New Contributor III
I want to access my zonedirector (1100) out of lan. Is there any way to do it ? Or is there anybody tell me the zonedirector web interface port.If I know that I will do a port redirection from my modem and this time I can reach from wan.
4 REPLIES 4

munish_munish
Contributor
Hi Ali,

TCP destination ports 80 and 443 (HTTP and
HTTPS)

Thanks
Munish

ali_sureyya_uz
New Contributor III
OK, Munish thank you very much,443 works here. I redirect 443 to 440 (just random) and it woks. This probably help me ZD Remote at android. Thanks again.

munish_munish
Contributor
Hi Ali ,

UDP 12222 & 12223 for LWAPP

TCP 443 for https and TCP 80 for http

TCP 22, if SSH to ZD needed; TCP 23, if Telnet to ZD needed

These have to be configured to ZD’s private IP address on NAT port mapping table.

Thanks
Munish

michael_brado
Esteemed Contributor II
By default ZD has HTTPS and SSH enabled, HTTP and Telnet are not (for security).