Showing results for 
Search instead for 
Did you mean: 

Ruckus P300 passing multiple VLANs

New Contributor II

I have a set of P300s I am deploying as a point to point pair. They are set as the main and remote. The IP is a /30 IP. I have multiple VLANs I want to pass across the link, but I am not sure if there is anything special I need to do. 

On my switch at the main side I have VLAN 1,2,3,4 that I want to pass to the remote side switch for Users and devices. On the main side I have the port set up like a trunk with VLAN 1 native (untagged) and the others allowed (tagged). The remote side I have a trunk configured with VLAN 1 untagged and the others tagged. The IP of the two P300s is different from the IPs of the VLANs. For example: VLAN 1 is, VLAN 2 is, VLAN 3 is etc (just using as an example). The IP for the P300s I have set as static is on the main and on the remote side. 

This configuration should work? Or is there something else I am missing? I had them connected and powered up. I was not able to pass traffic.