This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Accept
Reject
Ruckus Wireless
RUCKUS Self Help |   ASK the Pack
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

R700 not passing data not sure what I'm doing wrong??

Anonymous
Not applicable

‎08-09-2016 06:51 PM

The APs are on VLAN 33. They receive an IP address from VLAN 33. You can see the WLAN SSID and you can also connect to the SSID. Once connected, you are handed an ip address from VLAN 33. However, you cannot ping or connect to anything. If I SSH into the AP, I can ping anything and everything but the clients attached to the AP cannot ping or connect to anything. Its almost like the AP handed out the DHCP address and then went into "don't pass any data mode". Any thoughts why I cannot get on the network? Thanks.
9 REPLIES 9

Anonymous
Not applicable

‎08-09-2016 07:06 PM

Make sure your gateway is correct...
0 Kudos

Anonymous
Not applicable

‎08-09-2016 07:22 PM

Which gateway? My DHCP server hands out the gateway. It's 172.16.33.1. The clients get that but cannot connect. If I plug a PC in they get the same gateway and they can connect. Or are you referring to a sifferent gateway?
0 Kudos

Anonymous
Not applicable

‎08-09-2016 07:41 PM

Thats the gateway I was referring to. Is the ap the client connects to the only one or are there other aps that this is happening to as well? What about other ssids? Are other ssids effected?
0 Kudos

Anonymous
Not applicable

‎08-09-2016 07:56 PM

I have only 3 APs installed. There will be 40 APs when finished. Of the 3 installed only one is active. I was running a test before I move on. Cannot get connected through that one. AP has 172.16.33.5, client was given 172.16.33.6. The CLI of the AP can ping everything. The client cannot ping anything.
0 Kudos
Copyright © 2026 Khoros, LLC