Have read many posts and am convinced I have some type of configuration issue. All of my new devices (e.g., iPhone XS, Surface Pro 6) seem to top out at 100/100mbps. I don't use mesh, have 3 R500s and a ZD 1200 connected to Verizon FIOS Gigabit internet which delivers 800+mbps to my hardwired devices/PCs. Have setup separate 2.4 and 5 networks and they all seem to max out at 100mbps. Just seems too coincidental. It's a private home with no interference. Thanks
Yes, this is where it's set but if its auto it will most likely be 80MHz. Ok here's what i would do next (other than ask for the answer to Chris' question):
Download the Ruckus speedflex app from the app store onto your iPad. Then, create an SSID where you have direct access to the IP address of the AP you are connected to. Then run the speedflex app and set the server address to the AP IP address and run the test. This will give you a true test of the Phy speed you are getting and eliminate any other bottlenecks in your network.