single Ruckus R350 always in Provisioning State

[goech]

I did set up a single ruckus r350 with unleashed and everything is working as expected. I have 3 Wifis in different VLANs and handle the management via the native VLAN1. I can access the management and all the Wifis work as expected in the different VLANs. But somehow the in the management website shows disconnected/provisioning - internet connection is there. Is it because I only have one R350 or do I have to up something more? 
I allowd Port 80/443 and 123 outbound on the firewall for the AP. One thing I see is there are some request from the AP on port 60000 but I dont know what this is - allowing it also didnt improve the situation. One thing I do, I use ubnound as DNS - maybe there could be an issue?

I already made an firmware upgrade to 200.18.7.101.244 and did an Firmware reset. Still the issue persists. Any help would be appreciated.

[sanjay_kumar]

Hi @goech,

Are you referring to the Internet Status on the Dashboard page?
Or are you referring to the "Status" section on the Access Point page?
Could you please share the screen shot?

By default AP will use the below sites to check the internet status. Probably you need to allow these 2 websites in the firewall. Or can also disable the "Internet Status" check from CLI. Follow the below link to disable.
captive.apple.com
www.microsoft.com
www.baidu.com

https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/DNS-Requests-to-baidu-com-f...

[goech]

I am referring to the AP status. The internet status is fine, I was able to do the firmware update with it.

Here a screenshot:
https://imgur.com/a/Aiowr01

In the upper right corner the ap is read and tells me as status not connected/provisioning.

[goech]

I just checked all pages and one thing I am wondering is: in the upgrade view the ap is in the state downloading update all the time - is this as expected? https://imgur.com/a/9elP1e4

[sanjay_kumar]

Hi @goech,

When you switch to Access Points Page, what is the status of the AP?
Does it say Online?

The page is stuck in Upgrade stage, which is causing the AP to show as Not connected.
This happens if the AP is able to detect another Master in the network or the AP is stuck in upgrade loop.

I believe there is no other AP in the premises, have you tried rebooting the AP by any chance?