how to use mbss cli command

[Anonymous]

I have used mbss command for r750 solo version.

how to use mbss setting in unleashed 200.9.0version?

[DarrelRhodes]

Hi Suhyeon,

Are you referring to the CLI setting for the BSS Minimum data-rate?

If so the Unleashed command is, for example to set the minimum data-rate at 12Mbps:

ruckus(config-wlan)# bss-minrate 12

You're probably already aware but you will first need to load the WLAN you want the BSS minimum data-rate config to apply to.  E.g.:

ruckus(config)# wlan ruckus2

The details are in the Unleashed CLI documenation on the Ruckus support site (you will need an active support contract to access).

Hope that helps,
Darrel.

[Anonymous]

sorry, I referred to the cli for multiple bssid T.T

[DarrelRhodes]

Please can you explain what it is you want to achieve? Multiple SSIDs on the same AP?

[Anonymous]

The Multiple BSSID is similar to Multiple SSIDs. But Multiple BSSID element collapses information for multiple BSSIDs (= SSIDs) into one single beacon frame.