Unleashed mgmt-acl & LACP

[taylor_sanders]

Hi,

First time trying Ruckus and got 3x R710s on Unleashed 200.9.10.4.233.

Looking for two things in cli but not finding.  Unsupported?

1) Mgmt-acl - https://docs.commscope.com/bundle/unleashed-200.9-commandref/page/GUID-4D9DBEAA-A3A9-43E3-BE31-3DA01...

On config-sys context I don’t have mgmt.-acl.  Only mgmt.-if

ruckus(config-sys)# mgmt-acl macl1
The command is either unrecognized or incomplete. 

How to set management ACL on unleased? 

2) I believe LACP may not be fully supported on R710 unleased but running into blocked KBs when searching.

https://forums.ruckuswireless.com/conversations/ruckus-indoor-aps/r710-lacp-and-200810/5f91c3f1135b7...

I did find LACP procedures here but not finding xmit-hash or lacp-rate? 

https://forums.ruckuswireless.com/conversations/ruckus-indoor-aps/lacp-on-r710/5f91c3f3135b77e2478f6...

ruckus(ap-mode)# get bond

LACP/Bonding is ENABLED.

<bond0>

        Mode:           8023AD

        LACP-rate:      slow

        MII-Mon:        100 (ms)

        Xmit-Hash:      layer2+3

        Slaves:         2

        Slave-0:        eth0, ACTIVE, UP, link-fail-count: 0

        Slave-1:        eth1, BACKUP, UP, link-fail-count: 0

OK

Thank you.