Hi,
First time trying Ruckus and got 3x R710s on Unleashed 200.9.10.4.233.
Looking for two things in cli but not finding. Unsupported?
1) Mgmt-acl - https://docs.commscope.com/bundle/unleashed-200.9-commandref/page/GUID-4D9DBEAA-A3A9-43E3-BE31-3DA01...
On config-sys context I don’t have mgmt.-acl. Only mgmt.-if
ruckus(config-sys)# mgmt-acl macl1
The command is either unrecognized or incomplete.
How to set management ACL on unleased?
2) I believe LACP may not be fully supported on R710 unleased but running into blocked KBs when searching.
https://forums.ruckuswireless.com/conversations/ruckus-indoor-aps/r710-lacp-and-200810/5f91c3f1135b7...
I did find LACP procedures here but not finding xmit-hash or lacp-rate?
https://forums.ruckuswireless.com/conversations/ruckus-indoor-aps/lacp-on-r710/5f91c3f3135b77e2478f6...
ruckus(ap-mode)# get bond
LACP/Bonding is ENABLED.
<bond0>
Mode: 8023AD
LACP-rate: slow
MII-Mon: 100 (ms)
Xmit-Hash: layer2+3
Slaves: 2
Slave-0: eth0, ACTIVE, UP, link-fail-count: 0
Slave-1: eth1, BACKUP, UP, link-fail-count: 0
OK
Thank you.
