Showing results for 
Search instead for 
Did you mean: 

Unleashed error message "Is-Partial" API when changing Chanalization

New Contributor II


I have 2 R510 AP's with the latest Unleashed firmware (200.13).
When I want to change the chanalization on both 2,4Ghz and 5Ghz from AUTO to 20Mhz and 40Mhz an error message appears:

Is-Partial API Body Invalid

I don't understand what is missing. I cannot find any reference. AP's have been rebooted but no change. Can anyone advice?


RUCKUS Team Member

Hi @rob_harmsen_5i8 

Do you have any Switch added to Unleashed?
Can you try changing the Channel on only 2.4 Ghz and check?
Also, are you able to change other settings?

New Contributor

Did you find anything on this

New Contributor

I'm having this problem as well. What is the solution for this?

I do have a ICX 7150-C12P powering the AP, and I was only trying to set 2.4 GHz Channels 1, 6, and 11 to be on, and that's when the error appeared.

I've changed some other settings in Unleashed, and this was the first time I've encountered this error so far.