Smart Roam on Unleashed AP's

[jason_santlofer]

Anyone Use Smart Roam on an Unleashed Network? Is it in a firware revision? I can't seem to find the option. On Zone Director networks it was always just a checkbox.

[monnat_systems]

on controller based solution,, SMART ROAM was cli based.
on unleashed - CLI is NOT supported as per my knowledge..
as per feature list supported on unleashed as per firmware version 200.2 - smart roam is NOT listed ...

The Ruckus Unleashed platform provides many of the same features that are currently available using a ZoneDirector wireless LAN controller:

• Smart Mesh
• One-step firmware upgrades of the entire network from a single interface
• Layer 2 roaming
• Zero-IT support for automatic configuration of client WiFi settings
• Dynamic Pre-Shared Keys (DPSK)
• 802.1X EAP authentication using an external AAA server (RADIUS)
• HTTP-based Captive Portal
• Hotspot (WISPr) WLANs
• Guest Access WLANs
• Bonjour Gateway
• WLAN encryption/authentication options:
  • Open + None
  • Open + None + MAC Auth
  • Open + None + Web Auth
  • Open + WPA2 + AES + PSK
  • Open + WPA2 + AES + DPSK
  • 802.1X + WPA2 + AES + AAA
• Radio Frequency (RF) management features:
  • BeamFlex
  • ChannelFly
  • Background Scanning
  • Automatic Channel Selection based on ChannelFly or Background Scanning
  • Band Steering
  • Client Load Balancing
  • Rogue AP detection
• DHCP server (configured manually from Unleashed Network Master AP)
• Automatic Master AP Selection
  • One Ruckus Unleashed AP serves as the "Master AP," one of the member APs will take over controller functions if the Master is unreachable.
• Access Control Lists
• Application Recognition. The following pie charts are provided:
  • Top 10 clients by application
  • Top 10 applications used in the network
• HTTP/HTTPs redirect
• Up to 512 local users supported (on the internal database)
• Up to 512 client devices supported (depending on encryption/auth method)
• SNMP
• Management IP Interface
• Multi-language support
• Social Media login (Facebook, Google)
• Self-Service Guest Pass
• WLAN Prioritization

[daniel_ward_jwc]

Hi Jason, have you found where this smart roaming feature is in the unleashed administration panel. i to was looking for the check box so my devices can always stay connected to the AP with the strongest signal. thanks!

[srikrishnan_mah]

Folks, is my understanding correct that from the firmware version 200.2, smart roam is not supported.  If so, how is smart roaming done in 200.5.  I am facing a problem where in 200.1, I set the smart-roam to 4.  But after upgrade to 200.5, I am not able to see the smart-roam setting in the CLI.  I am also not able to set this value in the 200.5 CLI.  Can you please help?

[jacky_yeung]

Hi , I cannot found smart-roam in CLI also. And I saw the SmartRoam = Disabled on the CLI status. 
Would you can help? Thanks.