cancel
Showing results for 
Search instead for 
Did you mean: 

Smart Roam on Unleashed AP's

jason_santlofer
New Contributor
Anyone Use Smart Roam on an Unleashed Network? Is it in a firware revision? I can't seem to find the option. On Zone Director networks it was always just a checkbox.
14 REPLIES 14

monnat_systems
Valued Contributor II
on controller based solution,, SMART ROAM was cli based.
on unleashed - CLI is NOT supported as per my knowledge..
as per feature list supported on unleashed as per firmware version 200.2 - smart roam is NOT listed ...

The Ruckus Unleashed platform provides many of the same features that are currently available using a ZoneDirector wireless LAN controller:

  • Smart Mesh
  • One-step firmware upgrades of the entire network from a single interface
  • Layer 2 roaming
  • Zero-IT support for automatic configuration of client WiFi settings
  • Dynamic Pre-Shared Keys (DPSK)
  • 802.1X EAP authentication using an external AAA server (RADIUS)
  • HTTP-based Captive Portal
  • Hotspot (WISPr) WLANs
  • Guest Access WLANs
  • Bonjour Gateway
  • WLAN encryption/authentication options:
    • Open + None
    • Open + None + MAC Auth
    • Open + None + Web Auth
    • Open + WPA2 + AES + PSK
    • Open + WPA2 + AES + DPSK
    • 802.1X + WPA2 + AES + AAA
  • Radio Frequency (RF) management features:
    • BeamFlex
    • ChannelFly
    • Background Scanning
    • Automatic Channel Selection based on ChannelFly or Background Scanning
    • Band Steering
    • Client Load Balancing
    • Rogue AP detection
  • DHCP server (configured manually from Unleashed Network Master AP)
  • Automatic Master AP Selection
    • One Ruckus Unleashed AP serves as the "Master AP," one of the member APs will take over controller functions if the Master is unreachable.
  • Access Control Lists
  • Application Recognition. The following pie charts are provided:
    • Top 10 clients by application
    • Top 10 applications used in the network
  • HTTP/HTTPs redirect
  • Up to 512 local users supported (on the internal database)
  • Up to 512 client devices supported (depending on encryption/auth method)
  • SNMP
  • Management IP Interface
  • Multi-language support
  • Social Media login (Facebook, Google)
  • Self-Service Guest Pass
  • WLAN Prioritization

daniel_ward_jwc
New Contributor
Hi Jason, have you found where this smart roaming feature is in the unleashed administration panel. i to was looking for the check box so my devices can always stay connected to the AP with the strongest signal. thanks!

srikrishnan_mah
New Contributor
Folks, is my understanding correct that from the firmware version 200.2, smart roam is not supported.  If so, how is smart roaming done in 200.5.  I am facing a problem where in 200.1, I set the smart-roam to 4.  But after upgrade to 200.5, I am not able to see the smart-roam setting in the CLI.  I am also not able to set this value in the 200.5 CLI.  Can you please help?

jacky_yeung
New Contributor
Hi , I cannot found smart-roam in CLI also. And I saw the SmartRoam = Disabled on the CLI status. 
Would you can help? Thanks.