We have setup Ruckus Unleashed network with 6 numbers of R310 APs setup is working fine after a week i didn't see an SSID we have created when going to check through web console its asking for create new unleashed network thats we have created before and there is one option available APs info there i can see my AP detail that i was configured before. is there anything missed or something issue with APs?
What is your current state Shoeb? That sounds like what you might see if you go directly to the IP address of an unconfigured AP, but you said you had a working SSID for a week?
You do want to do the Setup Unleashed network on your first AP, so it becomes Master AP. You can upgrade this to the current version if you've haven't got latest version 22.214.171.124.186. [Admin&Services->Administer->Upgrade]
And then for all other new/factory defaulted Unleashed APs they should recognize that there is an Unleashed network and Master AP to get upgraded/configured from.
Your network needs a router for default-gateway, and there's usually a DHCP server handing out addresses from a scope/range. While using DHCP for initial connections is ok, we recommend you assign your APs a static IP address, and setup a Management IP address, which are *outside* of the scope assigned by the DHCP server. [So you can always get to them, and their addresses won't get assigned to other client devices (reserved IPs)] [Admin&Services->System->Device IP Settings->Management Interface]