cancel
Showing results for 
Search instead for 
Did you mean: 

Ruckus Unleashed R510 doesn't work at all?

thomas_oppyen
New Contributor III
I've been testing unleashed on different model ap's for sometime now.. Have also deployed a cluster with R500 at a client site..
Today i tried R510 with unleashed firmware.. It proved to be extremely buggy and not working at all. Everything seems ok during config, but once it's up and running clients are disconnected almost every 5 sec.. Both laptop and mobile devices.. I had to unplug the ap's as i got disconnected all the time and replace them with R500, problem solved..
Hopefully a new software release will solve this? Or does anybody have any other suggestions?
5 REPLIES 5

nat_nat
Contributor II
Which version of software are you running on Unleashed R510?

thomas_oppyen
New Contributor III
Version: 200.3.9.13.228
I've tested it on 2 ap's both had the same problem. Going to reset and upload firmware again and see if that makes any difference..

thomas_oppyen
New Contributor III
I've tested the same version on R500 and R310 without any issues..

nat_nat
Contributor II
I would suggest factory-reset the AP and try again. I have been running my network with R710 and R510 running 200.3.9.13.228 and working fine.