Ruckus Unleashed 200.5 has bug
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-31-2017 03:58 AM
After testing the 200.5 version of the defective R500 R600, will lead to a series of models, wireless LAN appears high delay, packet loss and other cases, only by reducing version to solve the problem, hope that the official personnel test, to fix the problem.
thanks
thanks
19 REPLIES 19
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-31-2017 10:00 AM
Hello Li,
Please open a ticket with Tech Support so we can help analyze your environment and test results.
Let me know your case number, so internal engineers can assist. Thanks.
https://support.ruckuswireless.com/contact-us
Please open a ticket with Tech Support so we can help analyze your environment and test results.
Let me know your case number, so internal engineers can assist. Thanks.
https://support.ruckuswireless.com/contact-us
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
11-06-2017 06:24 AM
I have opened a ticket about this three weeks ago, and Ruckus is slowly going nowhere.
For the OA, please check https://forums.ruckuswireless.com/ruckuswireless/topics/r500-slow-troughput-high-latency-high-packet...
The problem occurs if you are using Radius authentication with only highest encryption setting selected in NPS network policy options. So... the trick would be allow less powerful encryption settings along with No Encryption setting. So far Ruckus (or anyone else) hasn't been able to tell me in what exactly does those encryption settings do.
For the OA, please check https://forums.ruckuswireless.com/ruckuswireless/topics/r500-slow-troughput-high-latency-high-packet...
The problem occurs if you are using Radius authentication with only highest encryption setting selected in NPS network policy options. So... the trick would be allow less powerful encryption settings along with No Encryption setting. So far Ruckus (or anyone else) hasn't been able to tell me in what exactly does those encryption settings do.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
11-06-2017 09:33 AM
Hi,
What is your case number please? And have you or would you please ask your Tech Support to file a bug?
I don't think there is any type issue reported yet (that I can find), and you seem to have a set of reproduceable
steps. Thanks!
What is your case number please? And have you or would you please ask your Tech Support to file a bug?
I don't think there is any type issue reported yet (that I can find), and you seem to have a set of reproduceable
steps. Thanks!
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
11-06-2017 11:48 PM
Case 00566046, asked to file a bug

