RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
11-11-2022 05:32 AM
I have a Ruckus Unleashed Network of R510 APs and want to know if I can add R550s to that network.
Thanks
Solved! Go to Solution.
11-11-2022 05:59 AM - edited 11-11-2022 06:03 AM
Hi @nensby
Hope you are doing well !
Yes, you can mix R510 ( 802.11ac ) with R550 ( 802.11ax ) on your unleashed network.
Only need to match the basic requirements
1-To be on the same network (subnet) ' reachability to the Master AP '
2-Run the same firmware version.
Best Regards
Fernando Vasquez
11-11-2022 05:59 AM - edited 11-11-2022 06:03 AM
Hi @nensby
Hope you are doing well !
Yes, you can mix R510 ( 802.11ac ) with R550 ( 802.11ax ) on your unleashed network.
Only need to match the basic requirements
1-To be on the same network (subnet) ' reachability to the Master AP '
2-Run the same firmware version.
Best Regards
Fernando Vasquez
11-11-2022 06:05 AM
I am well thank you Femando. Hope you are well too.
Thank you for your prompt response. That's great. I will get them ordered.
Regards,
Neil
11-11-2022 06:17 AM - edited 11-11-2022 06:29 AM
Doing fantastic , Awesome !!
Please feel free to mark the post as solution
Feel Free to use the user guide :
https://support.ruckuswireless.com/documents/4105-ruckus-unleashed-200-12-user-guide
Release notes :
https://support.ruckuswireless.com/documents/4163-ruckus-unleashed-200-12-mr1-release-notes
Click here Unleashed overview
Best Regards
Fernando Vasquez
