10-05-2021 02:00 AM
I have an R510 with Unleashed version 200.10.10.5.246 connected to a Vigor 2960 router via a PoE-switch.
Router and R510 are on the same subnet and same VLAN.
The Wifi clients are connected to the Internet, they get their IP address from the DHCP server on the router (= gateway), so no issues there.
But on the Unleashed dashboard it says that the AP is disconnected from the Internet, because it cannot reach the Gateway and DNS. What am I missing?
10-05-2021 10:42 AM
Hi,
Try to set local DNS once and see if that fixes the issue.
Unleashed tests the internet connection by reaching couple of public servers, if those are somehow blocked on firewall/gateway, internet will show disconnected.
10-05-2021 11:55 PM
Hi Syamantak Omer,
Thanks for your suggestion, but I already tried that. Actually, I had configured local DNS, but that didn't work, so then I tried Google DNS.
Right now the firewall is not blocking anything, but during the initial installation of the AP, Internet access was blocked. Could it be that the AP somehow remembers that state and doesn't change it now that Internet access is no longer blocked?
Regards,
Tjebbe