Quality of Service for selected clients
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-06-2016 02:26 PM
Hi All,
There a couple of laptops that I would like to "hog" wireless bandwidth, from two R310s Unleashed, to prevent buffering of streamed video media content. Is this possible (or desirable)?
Many thanks in advance,
gimbers
There a couple of laptops that I would like to "hog" wireless bandwidth, from two R310s Unleashed, to prevent buffering of streamed video media content. Is this possible (or desirable)?
Many thanks in advance,
gimbers
9 REPLIES 9
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-06-2016 03:20 PM
By using the default parameters all clients will have an unlimited data rate. The only was to prefer one client over another is to rate limit the other clients. You could do this by creating a new WLAN with rate limiting for the clients that don't have the bandwidth requirements.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-06-2016 11:11 PM
Thanks Mike. Found those settings and that makes sense. gimbers
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-07-2016 03:14 AM
Hi Rex, we deal with a lot of live streamed events. Typically I'd always use Ethernet connectivity, however if we need to use Wifi I have found it more beneficial to run access points running unleashed and broadcasting 5GHz only (If the streaming device allows 5GHz) on a separate dedicated LAN and rate limit as Mike states above, although this only rates at host level and not at network level. If you need the controllers however you can also force the Wi-Fi traffic to route via the ZD controller. We've run multi bit streams (480, 576 & 720p) on this setup and it's worked fine. Final thought is that you could also limit the volume of clients connecting to these two access points which would force hosts to connect to other access points...
Hope this helps
Chris
Hope this helps
Chris
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-07-2016 03:50 PM
We have a feature request for Unleashed to service WLANs on 2.4GHz and/or 5GHz, which currently broadcast on both bands (200.1).

