PlayStation 4 and Unleashed

[joel_goudswaard]

Hey guys,

I have a customer who had an R710 that his kid's playstation 4 was connected to with no dramas. Last week I removed the R710 and replaced it with 2 x R600's with the unleashed firmware. I recreated the wireless profile with the same SSID and password and all 14 of his devices (on both frequencies) reconnected without a hitch except for his PS4. I tried all manner of ways of reconnecting it from "easy setup" (on the PS4) right through to entering every setting manually to no avail.

Finally I created a new network on the unleashed master with a different SSID and the PS4 connected straight away and has been performing very well ever since. My theory is that the wireless profile stored on the PS4 for the old R710 had a slight mismatch in a setting somewhere which didn't let it connect to the new AP. I wasn't able to factory reset the PS4 as the guy didn't want to lose anything so can't be 100% sure but just wondering if anyone has seen anything similar before? Ideally I would like to remove the second SSID but suspect this won't be possible without factory setting the PS4.

Thanks guys!

[joel_goudswaard]

Thanks all for the responses, off the top of my head I usually do WPA + WPA2 with AES encryption so sounds like we are in the ballpark. I recall something similar about the PS4 only being able to store one profile at a time at one stage. I haven't been back out there yet but will try and reconnect the PS4 or at least find a way to delete the profile.

Cheers guys great help 😄