Is the Beamfelx is completely autonomous or do we need to configure required pattern in Ruckus R320 Unleashed?

[gazda_rendszer]

Hi,

If its configuration is manual then how to?

Details:

We have a  storage building installed with 22 pieces Ruckus R320 Unleashed .

We are experiencing consequent  asymmetrical RF coverage issue along the building.

One side of the building has much weaker signal than the other.

The AP-s are placed along on center axis of the building in a straight line.

With equal distances.

Near to the roof on a cable trail.

All are faced towards to the floor.

The storage building has “streets” from the shelfs perpendicular to center axis

So there are AP-s in the center of every street.

Every AP-s has direct visual from their steet.

We are  expecting all streets are  lighted  simmetrically  by own AP to both direction of the street. Actually it is failed.

[eizens_putnins]

 So probably responsible customer person making this decision was not informed to take this into account, and decision was wrong. 

This isn't even vendor specific reasoning -- situation is same with all main vendors, Ruckus is the  best performing from all in similar conditions, but still wonders do not happen -- you'll have some problems in any case, just as connectivity is generally better with Ruckus in comparison with similar (comparable) solution from other vendors.

[eizens_putnins]

Make it much better. But need troubleshooting in some cases anyway... Nothing is perfect, and actual warehousing environment definitely is not...

[gazda_rendszer]

Thank you for the comprehensive answers!

As I mentioned there all shelf corridor /street has own AP installed in the center and there is no any visual obstacle.

Just one more question.

Doest the orientation of the AP-s count?

If yes, vertical or horizontal faceing of the devices is  recommended?