I am a Newbie to Ruckus/Unleashed system and UI. I was trying to disable the 5Ghz signal and keep only the 2.4Ghz enabled in order to setup a couple electronic devices. I went through the unleashed App and tried to turn off 5Ghz through the manage network section. This resulted in both getting turned off and now I have no wireless network in the entire house. Any suggestions or support to enable the wifi again as well as manage the 2.4Ghz and 5 Ghz options independently would be highly appreciated. Thanks
I am able to access the internet when i connect to the 7150 device. However I am not able to access the unleashed dashboard to turn on the 2.4ghz and 5ghz radios. Any assistance would be highly appreciated
You can access the unleashed dashboard with the unleashed controller IP address.
To enable the radio on the WLAN go to the Unleashed dashboard>>WiFI networks>>Select the Wlan>>Click on Edit>>Show advance option>>Radio Control>>Select the Enable WLAN on all radio option. By doing this WLAN will start broadcast on 2.4ghz and 5ghz.
To create new WLAN please follow the below reference document