Continue wired network from mesh node

[roelvandenbrand]

Is it possible to continue a wired network from a R500 mesh node?

I am running a unleased r500 mesh network with the main node connected to a router with internet. I would like to add a switch to a mesh node on the other side of our building to add some computers (without wifi) on that end.

[michael_brado]

I'm not sure static IP clients beyond Mesh AP will work, as Ruckus would have no way to know those client MACs exist.
We don't have the commands to say this mac with this IP is on this interface, unless it's on your AP switch port side...?
Please share your test results.

[roelvandenbrand]

This is the situation I would like to create:

[monnat_systems]

yes its doable as suggested earlier.. thx

[roelvandenbrand]

Found this in Ruckus documentation. It might be easier than I thought.

[monnat_systems]

yes, its pretty much the same you made...