The part number for Unleashed AP models begins with 9U1-xxxx and for standard Solo AP code with 901-xxxx.
The Solo AP code will connect to a ZoneDirector, SmartZone or Cloud controller, or run in Standalone state. The
Unleashed AP firmware is designed not to look for or connect to a ZD or SZ, but would join the Cloud.
You can swap firmware on your Unleashed R710 and use it on your ZD, but if you needed an RMA, you would
get another Unleashed version, that you would have to convert code on again. We recommend that you return
the 9U1 ordering part number AP for a 901 ordering part number AP.
If you want to, you can download Solo AP code to your laptop, directly connect to the AP (no network with DHCP
or ZD), so you can talk to 192.168.0.1 after a factory default and connecting to the default SSID. The first screen will
have Show AP Info with Upgrade option (if I remember off the top of my head), to switch code to Solo 126.96.36.199.1347
from this .zip. https://support.ruckuswireless.com/software/1017-zoneflex-solo-access-point-104-0-0-0-1347-ga-softwa...
And there's a KBA with the screens here:https://support.ruckuswireless.com/answers/000005193