Can't integrate R320 into network

[DoktorMac]

Hi!

I have a smoll network with 4 Ruckus. The Master is a R510 and one Client a R320. This works. I wanted to ad two used (for testing) R310, resettet them, put the same Firmware as on the working ones 200.15.6.212.14 by local updates. This worked also fine. The two "new" ones are reconginzed >Administration >Upgrade >APRoles as "Member". Unfortunately they are not shown in >Access Points.

My Questions:

- How can I integrate them?
- Do I have to do it manually?
- How should this work?

I didn't find any solution.

Thanks a lot for answering me!

Peter Brechbuehl, DoktorMac, Bern, Switzerland

[Vásquez_Fer]

Hello  DoktorMac , 

Hope you are doing well , 

One of the requirements for adding Unleashed access points to an existing network is that they must be on the same firmware version. However, the R310 access points, having been discontinued for some time, only support up to firmware version 200.7. Since your current network is on version 200.15, this makes them completely incompatible

Best Regards 

Fernando Vasquez