cancel
Showing results for 
Search instead for 
Did you mean: 

Announcement - Unleashed 200.1 MR (200.1.9.12.62) is now Online

michael_brado
Esteemed Contributor II
Ruckus Unleashed 200.1.9.12.62 MR firmware update has been implemented on the Cloud server.
Admins who check for an update and perform Upgrades will get 200.1.9.12.62 installed to all APs.

Read the Unleashed 200.1 MR Release Notes and What's New, and download Solo AP images from
these links on Ruckus Support web portal.

From Release Notes:

Release 200.1 introduces the following new features and enhancements:

• Smart Mesh networking support

• Additional Unleashed APs: R310, T300, T300e, T301s, T301n

• SNMP (Simple Network Management Protocol) support

• Product Registration page added to Setup Wizard

• Updated UI organization

 

From What’s New:

· Support for Outdoor 11ac Access Point T300, T300E, T301N, and T301S

 Smart Mesh

 SNMP support

 Support Registration as part of initial deployment

 Enhanced web UI organization

Supported Platforms

Unleashed version 200.1.9.12.62 supports the following Ruckus AP models:

• R310

• R500

• R600

• T300

• T300e

• T301n

• T301s

 

The following release builds can be directly upgraded to Unleashed version

200.1.9.12.62 MR:

• 200.0.9.9.608 (Unleashed 200.0 GA)

• 200.1.9.12.55 (Unleashed 200.1 GA)

    Here are the Unleashed documentation links, MD5 checksumed firmware and

MIB URLs. 

 

Unleashed 200.1.9.12.62 (MR)
Release Notes:

https://support.ruckuswireless.com/documents/1043-ruckus-unleashed-200-1-mr-release-notes


 

Unleashed 200.1.9.12.62 (MR)
What’s New:

https://support.ruckuswireless.com/documents/1044-ruckus-unleashed-200-1-mr-what-s-new


 

Unleashed 200.1.9.12.62 (MR)
SNMP Reference Guide:

https://support.ruckuswireless.com/documents/1045-ruckus-unleashed-200-1-mr-snmp-reference-guide


 

Unleashed 200.1.9.12.62 (MR) for
R500:

https://support.ruckuswireless.com/software/940-unleashed-ap-software-200-1-9-12-62-mr-for-r500


 

Unleashed 200.1.9.12.62 (MR) for
R600:

https://support.ruckuswireless.com/software/941-unleashed-ap-software-200-1-9-12-62-mr-for-r600


 

Unleashed 200.1.9.12.62 (MR) for
T300:

https://support.ruckuswireless.com/software/943-unleashed-ap-software-200-1-9-12-62-mr-for-t300


 

Unleashed 200.1.9.12.62 (MR) for
T300e:

https://support.ruckuswireless.com/software/944-unleashed-ap-software-200-1-9-12-62-mr-for-t300e


 

Unleashed 200.1.9.12.62 (MR) for
T300s:

https://support.ruckuswireless.com/software/946-unleashed-ap-software-200-1-9-12-62-mr-for-t300s


 

Unleashed 200.1.9.12.62 (MR) for
T300n:

https://support.ruckuswireless.com/software/945-unleashed-ap-software-200-1-9-12-62-mr-for-t300n


 

Unleashed 200.1.9.12.62 (MR) for
R310:

https://support.ruckuswireless.com/software/947-unleashed-ap-software-200-1-9-12-62-mr-for-r310


 

Unleashed SNMP MIBs for
200.1.9.12.62 (MR):

https://support.ruckuswireless.com/software/942-ruckus-unleashed-ap-200-1-9-12-62-snmp-mibs
13 REPLIES 13

monnat_systems
Valued Contributor II
yes. you can upgrade to unleashed software... its simple. Login into the AP via GUI -- > upgrade option - select local option - browse to firmware file and hit upgrade. It will restart post upgrade..

monnat_systems
Valued Contributor II
Is the AP in question working as standalone or controller managed??

If standalone then what i mentioned above applies however if it is an controller managed then you got to hard reset the AP first. then remove from network and then follow the steps mentioned above...

prakash_donga
New Contributor II
I am able to upgrade it as Standalone AP, Only issue I am facing right now is sometimes WiFi signal drops in between sometimes.

michael_brado
Esteemed Contributor II
Please visit the Unleashed Forum to open new Questions to the audience at large.
https://forums.ruckuswireless.com/ruckuswireless/categories/ruckuswireless_ruckus_unleashed

Things can get lost, under the firmware release announcement notice, thanks.