Hi, just to update I have managed to get this working with the config below:
interface GigabitEthernet3/0/2
description Ruckus1100 Controller
switchport access vlan 5
switchport trunk encapsulation dot1q
switchport trunk native vlan 5
switchport trunk allowed vlan 5,24,32,40,44,56,72
switchport mode trunk
spanning-tree portfast
end
AP:
description WAP Access point
switchport access vlan 5
switchport trunk allowed vlan 5,24,32,40,44,56,72
srr-queue bandwidth share 1 30 35 5
priority-queue out
mls qos trust cos
auto qos trust
I am picking up the correct IP for the VLAN etc