cancel
Showing results for 
Search instead for 
Did you mean: 

Meshing T300 outdoor with main router (RB951)

martin_nyokolod
New Contributor II
Hi there! I have a RouterBoard RB951 as my main router and want to add a ruckus T300 zoneflex as a mesh to basically extend the existing SSID to the building surroundings. What type of set up is required here?
9 REPLIES 9

DarrelRhodes
Valued Contributor
Hi Martin,

Ruckus APs only provide wireless mesh (SmartMesh) connectivity to other (capable) Ruckus APs.  Furthermore with a T300 AP, you will need a Ruckus controller in order to enable SmartMesh functionality, such as a ZoneDirector 1200.

I hope that helps,
Darrel.

martin_nyokolod
New Contributor II
Thank you for replying.

Is the setup possible if I use the Ruckus R600 as Master and add T300 to the network?

DarrelRhodes
Valued Contributor
Hi Martin,

R600 and T300 APs can certainly be meshed together (providing each AP has sufficient 5GHz signal strength), however this would require a Ruckus controller, such as ZoneDirector 1200 to enable the SmartMesh function.

Regards,
Darrel.

michael_brado
Esteemed Contributor II
Or for them to both run Unleashed firmware, which supports mesh.