cancel
Showing results for 
Search instead for 
Did you mean: 

How to set the SNMP community string for all APs attached to a SmartZone 100?

stewie_griffin_
New Contributor
Title says it all. Trying to set the snmp community string on all APs attached to a SmartZone 100 but can't find where it can be done. On the ZoneDirector devices you can do this fairly easily but it doesn't seem to be anywhere on the SmartZone. Any ideas?
3 REPLIES 3

michael_brado
Esteemed Contributor II
Hi Stewie,

    From Configuration tab, System/SNMP Settings on the left, click the box to Enable SNMP traps globally.
Then you can "Add Community", for Read, Write, or Trap.

Image_ images_messages_5f91c420135b77e2479762e3_78054f58359d14d31a39398d105f40df_15976g4cw69_inline-35829bc9-9634-452c-80a0-e868ae9e6581-764760841.png1447699271

stewie_griffin_
New Contributor
Hmm we have this set but it's not being applied to any of our connected APs. Any idea why this might be the case? 

chris_rosenhain
New Contributor
You can SSH into the APs and set SNMP up:

set snmp-acl disable
set snmp version v2c
set snmp community ro
set remote-mgmt snmp