cancel
Showing results for 
Search instead for 
Did you mean: 

How to reproduce issues described in the release notes

technical_divis
New Contributor III
I'm sorry for asking you so many times.
Could you teach me how to reproduce the following issue's ?

5.1.5. An issue with APs being unable to join ZoneDirector due to the
default MTU size set on ZoneDirector running on version 9.6. (ID ER-929)
I've used a version 9.7.0.0.220 on ZoneDirector.

5.1.18 An issue with Dynamic VLAN assignment failing due to changes in
the format of the called-station-id value between versions 9.6 and 9.7. (ID ER-1243)
I've used a version 9.6.2.0.13 and 9.7.0.0.220 on ZoneDirector.

5.1.21. An issue with Guest Access that could cause clients to get stuck in
a redirect loop when the management IP address is used for redirection. (ID
ER-1171)
I've used a version 9.7.0.0.220 on ZoneDirector.

5.2.2. An issue with Hotspot service on standalone APs that could allow
clients to remain connected after the configured session expiration time. (ID
ER-1169)
I've used a version 9.7.0.0.220 on ZoneDirector.

Note: This topic was created from a reply on the ZoneFlex Release 9.7.1.0.17 (9.7MR1) now available! topic.
2 REPLIES 2

keith_redfield
Valued Contributor II
Please open a support case to get these details. It won't be practical to do that here.

thx

technical_divis
New Contributor III
I understand and I create a support case.
Thank you for the response.