cancel
Showing results for 
Search instead for 
Did you mean: 

How do you get the access points to use Option 43 for SCG?

martin_kulp
New Contributor II
I was able to set up DHCP option 43 with our new SCG IP address, and I see one of the APs now lists it properly in the server list acquired from DHCP. However, it still points to the old IP address. How do I get it to use the IP from DHCP instead of the manually configured IP?
2 REPLIES 2

martin_kulp
New Contributor II
To be clear, the AP now says something like

Server list: 100.100.100.100
Server list from DHCP: 200.200.200.200

I need it to connect to the server list from DHCP, not the server list. But it doesn't appear to be doing that.

robert_lowe_722
Contributor III
if there is a static SCG entered into the AP manually, best to factory default the AP which will clear out static config.