cancel
Showing results for 
Search instead for 
Did you mean: 

Start spanning tree on this VLAN/VLAN-group would exceed the maximum stp instance 32 limit

morgan_denton1
New Contributor

Hi Folks 

I'm using SmartZone to manage my switches and I use quite a few VLAN's in my network. I keep hitting this error.  can I increase this limit so I can use all of my VLANS without it moaning at me?

I can't find anything obvious, I did a command to use in the CLI but I'm assuming the SmartZone will override that?  

thank you

3 REPLIES 3

BenBeck
Moderator
Moderator

Hey there, 

You can increase the maximum amount of STP instances with the following:

ICX(config)#system-max spanning-tree <number>

Ex.

ICX(config)#system-max spanning-tree 253

You will also need to 'wr mem' and reload

Ben Beck, RCNA, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us

morgan_denton1
New Contributor

Thank you

will play now,  so the Smartzone Controller isn't going to overwrite this setting?

@morgan_denton1 It should not overwrite it.

Ben Beck, RCNA, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us