cancel
Showing results for 
Search instead for 
Did you mean: 

Ruckus ICX 7150

alexandr_potkin
New Contributor II

Hello everyone!

Need help. Some strange with my ICX7150. When I try firmware 09.0 get error with RADIUS TLS. When switch are boots see in log:

cp: can't stat '/.pkg/libpam/etc/*': No such file or directory
Creating TUN device
Creating the first Tap interface
ERROR: Failure in gw add
Starting TPM Infra
Group tss and User tss created
hostname set to Ruckus-ICX
Starting TCSD Daemon in 'fi' namespace
TCSD Up and Running
Enabling time stamp.
Setting Unix datagram queue len.
 Setting TCP keep alive params
Moving app to flash....
could not read config file /etc/radsecproxy.conf
                                                No such file or directory
                                                                         could not read config file /etc/radsecproxy.conf

So can't log in by RADIUS...

11 REPLIES 11

Orlando_Elias
Contributor

Hello, alexandr_potkin.

As a workaround, I recommend going back to the original version and restoring the switch to factory defaults, deleting the configuration. Then move to the new version and configure new the switch again.

I would suggest opening a ticket with Ruckus TAC for further digging into this issue.

With regards,
--
Orlando Elias
Technical Support

mohammad_atmazi
New Contributor III

Please upgrade your switch to  09.0a the  09.0  its not a full image 

alexandr_potkin
New Contributor II

Unfortunatelly, all of this methods doesn't work

Orlando_Elias
Contributor

Dear alexandr_potkin, 

Please file a new case with Ruckus TAC.

We'll be happy to look at this deeper.

We'll need the full booting log in a text file for our analysis and some configuration backup.

With regards,
--
Orlando Elias
Technical Support