Showing results for 
Search instead for 
Did you mean: 

how do i convert R300 from controller mode to standalone mode

New Contributor
One of the my R300 got associated with a controller and now is in controller mode. I need to set it back to standalone mode. how do i do that

Esteemed Contributor II
Disconnect the AP from the network and press the factory reset button will revert its IP to address.

If you directly connect a laptop with 192.168.0.x you can use HTTPS to login, with 'super' uid, 'sp-admin' pw.

From the WebUI, Maintenance::Upgrade, click Local upgrade method, and point to a image for your

model of AP, downloaded from the Support AP site.