Showing results for 
Search instead for 
Did you mean: 

ZF7982 standalone mode - can not use Google Chromecast

New Contributor II

I am using ZF7982, standalone mode and facing this issue: when i use Google Chromecast to cast from my laptop to my home TV, the video casting on TV is lagged, unable to watch. I didnt get this issue when used ASUS NT-R12. 
I wonder if any special setting on ZF7982 for casting service?


Community Admin
Community Admin

Hi Hieu,

Could you confirm the software version running on the AP and what are the WLAN settings?

Also confirm if casting is lagged or not at all showing the feed.

Try disabling directed multicast option and see if that helps.

There is a similar post you can refer for the commands related to directed multicast.

Syamantak Omer | Sr.Staff TSE | CWNA | CCNA | RASZA | RICXI


The current sofware running on the AP is which recommended by Ruckus.

The WLAN settings as enclosed. The casting is lagged. In additional, when i use wired cable connected to Google Chromecast, there isnt any issue so i do believe that something wrong with WLAN setting, not multicast/ unicast option.

Image_ images_messages_61d86920aea01e415fef67a9_ef220b6caf6519c7f1607688bf810d82_1-822dc371-1e8c-471c-ace0-412b218bcb66-46728356.jpg
Image_ images_messages_61d86920aea01e415fef67a9_0ff69ebfd739f8446cd054a810a90151_2-e1c7f8b2-fe72-4adb-ace1-535075bc7983-47651877.jpg
Image_ images_messages_61d86920aea01e415fef67a9_7e5c287bd89ea437e237f540e24b99de_3-fc63042d-7643-47bf-9f29-3922044633b6-48575398.jpg
Image_ images_messages_61d86920aea01e415fef67a9_abfec6b18362c13f05801b7b989a24fc_4-fe270e40-3551-4141-9f91-2bdd767032f5-49498919.jpg

@hieu_le WLAN configuration is standard so I do not find any issue with basic configuration.

9.x is very old and ZD firmware code, try below software version and see if it makes any difference.

You can also try

Syamantak Omer | Sr.Staff TSE | CWNA | CCNA | RASZA | RICXI


Actually i tried with both 100 & 104 but it even worse than 9x 🙂