The cli command to add ap to smatzone 100 .

[jan_bansberg]

I have been searching for hours, please tell me the command.

[Anusha_Vemula]

If the AP has SZ firmware, then use the command "set scg ip ".

If it has a ZD firmware, hard reset the AP first. Then give the following commands.

set director ip
reboot

Then AP will upgrade its firmware to SZ's firmware and then give the below command.

set scg ip
reboot

[Anusha_Vemula]

Refer to the article# 000003403 in our support site