ICX 7150-C12P not powering on, amber flash when plugged then no other response

[darwin407]

ICX-7150-C12P Switch is not powering up, and when plugged in, it flashes an amber light and then goes dark. I can confirm that the Switch is plugged into a well-known outlet/power source and tried to reset twice. I also tried with a new power cable. However, the failure persists.

[darwin407]

 

 

 

[darwin407]

Here is a link to video of the test

https://1drv.ms/v/c/8a9e42dc1b92fd1b/EQiHix9h8RJBqVE7PJvDunYBAVDoJt1lGb5u6yARQ9dsTA

[Imran_ruckus · Accepted solution]

Hi @darwin407 

Greetings!!!

Thank you for reaching out to the RUCKUS Lennar Home Community and for sharing the PICTURES and a VIDEO.

I hope this message finds you well. 

We appreciate the information you provided regarding your RUCKUS ICX-7150-C12P Switch not powering on.

Based on the troubleshooting done, your ICX-7150-C12P Switch is not powering up, and when plugged in, it flashes an amber light and then goes dark. And you confirm that the Switch is plugged into a well-known outlet/power source. However, the failure persists. This Switch unit Should be RMA (Return Merchandise Authorization) in simple words replacing it.

Feel free to contact us via chat, comment you already have a post, copy the link from the post (URL), and paste it into the chat to start the unit replacement.

Please follow the steps as shown in the below example:

As shown in the below picture, copy the link and share it via chat from the link provided:

The below link is to contact us by chat (only)

https://support.ruckuswireless.com/contact-us

Did I answer your queries? If yes, hit the Kudos buttons and also accept the answers as Accepted solutions.

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.